Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 73)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 73
Change method
name 1. Display the Main window.
2. Press 4 then 2.
3. In the ID field, enter the new name (16 characters maximum).
Change reagent
name 1. Display the Reagent window.
2. Press 4 then 2.
3. In the ID field, enter the new name (20 characters maximum).
Change
sequence name 1. Display the Main window.and select Sequence or SAC sequence.
If the SAC Sequence command is not available,
declare a Sample Changer (SAC80, SAC90, SAC850,
SAC950) in the Setup > Configuration menu
(Supervisor access only).
Refer to "Sample changer", page 198 .
2. Press 2 Sequence/Sample stack
3. In the Sequence/Sample stack menu, select ID.
4. Enter the new name (16 characters maximum).