Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 157)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 157
Printouts
detailed Refer to "Detailed", page 87 .
Printouts menu To access:
• Method: Method library > Edit method > Printouts (key 4).
• Reagents: Reagents library > Edit reagent > Printouts (key 4).
• Electrode: Electrode library > Edit electrode > Printouts (key 4).
Printouts setup Perform the following, before printing:
1. Connect the printer to the Titration Manager.
2. Enter the Setup menu (Stop, 3 seconds from the Main window).
3. Press 1 Configuration.
4. Select Printer = 80 columns.
5. Select the printout format (Listing or Page by Page). Refer to
"Format (printouts)", page 119 .
6. Press Esc then 3 to customise the printouts, e.g. enter worksta-
tion name.
7. In the Edit method > Printouts, Edit reagent > Printouts and Edit
electrode > Printouts menus define the contents of the printouts.
The Detailed = High/Medium/Low option set the amount of
information that will be printed automaticaly at the end of each
test.
Refer to "Detailed", page 87 .