Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 85)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 85
Delay after
addition Option available with TitraLab 865 or TitraLab860 with one or two
ABU52 connected.
This delay is counted down after a reagent addition. This time allows
the solution to stabilise after a reagent addition and before the next
titration starts.
While an addition method is running, you can carry on
regardless this delay by pressing key Del.
Enter in:
Edit method > Parameters (titration method if Addition = Yes)
Edit reagent > Calibration parameters (titration method if Addition
= Yes)
Range available:
00:00 to 99:59 min:s
Delete electrode 1. Select the electrode to be deleted.
2. Press 4.
3. Press
✓ to confirm or ESC to leave the menu with deleting.
It is not possible to delete an electrode which is part of a
sequence or Coupled method. Modify the method or se-
quence, e.g. change electrode ID or remove the electrode,
before deleting.
Delete method 1. Select the method to be deleted.
2. Press 4.
3. Press
✓ to confirm or ESC to leave the menu with deleting.
It is not possible to delete a method which is part of a
sequence or coupled method. Remove the method from the
sequence or from the coupled method before deleting.
Delete reagent 1. Select the reagent to be deleted.
2. Press 4.
3. Press
✓ to confirm or ESC to leave the menu with deleting.
It is not possible to delete a reagent which is used in another
method or sequence. Modify the method or sequence, e.g.
change reagent ID or remove the reagent, before deleting.