Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 197)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 197
SAC80/SAC90/
SAC850/SAC950 Define and connect a sample changer:
Refer to "Sample changer", page 198 .
Edit a sequence with a sample changer:
Refer to "Programming sequence", page 159 .
Select a sequence with a sample changer:
Refer to "Select sequence", page 204 .
Run a sequence with sample changer:
Refer to "Running a SAC sequence", page 194 .
Same buffer
change buffer This message appears at the start of an electrode calibration. The
same buffer has been programmed for 2 successive steps in the cali-
bration procedure.
Press
✓ and change one of the buffer values in the Solutions menu of
the electrode calibration method.
Sample amount Enter the amount of sample used for the titration or dilution.
Enter in:
Edit method > Sample
Range available:
0.001 to 100000 (unit = Sample unit)