Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 45)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 45
Acceptation Result acceptance time limit.
When the time entered for the Acceptation has elapsed the
measurement will be accepted whether stable or not.
For the signal to be accepted once the Acceptation has
elapsed, the Max. Stab. time must be greater than the Accep-
tation time.
Enter in:
Edit method > Parameters menu
Edit reagent > Calibration parameters menu
Edit electrode > Calibration parameters menu
Range available:
0 to 59:59 min:s
Access routine
mode Press Stop for 3 seconds from the Main window then press 2.
These rules can be set by the Supervisor to allow the routine user ac-
cess to certain operations.
Enter in:
Setup menu > Access routine mode
Active electrode
unknown in
"method ID" The method in use, has at least one electrode which has not been
defined. Press
✓ and declare the electrode in the Electrode ID field of
the Method parameters screen.
The reagent in use, uses an electrode which has not been defined for
the reagent calibration. Press
✓ and declare the electrode in the
Parameters screen of the reagent calibration, Electrode - ID field.