Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 35)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 35
Programming SAC sequences
A SAC sequence is a sequence of methods with automatic change of the beakers. A sample
changer (SAC80, SAC90, SAC850 or SAC950) is used.
1.
Press Stop for 3 seconds to
enter the Setup menu.
2
Press 1.
3.
Select a Sample Changer
(SAC80, SAC90, SAC850 or
SAC950). Enter the parameters
of the sample changer selected
(number of rinses, rinse time,
etc.).
Press Esc then 5 (Exit) to quit
the Setup menu.
4.
Select SAC Sequence.
5.
Press 2.
6.
Enter a name for the sequence.