Edit electrode menu, Titra lab – Hach-Lange TITRALAB 860_865 Reference Manual User Manual
Page 94
Advertising
Titra
Lab
®
TitraLab 860 and 865 Reference Manual
Page 94
Edit electrode
menu
In this menu, you can rename the electrode (line ID), revise electrode
data, decide if you want to calibrate the electrode
(line Calibration request) and enter the electrode
calibration data if relevant.
To access:
1.
Press 4 in the Electrode window.
2.
Press 2 Edit electrode.
The following menus are accessible using the arrow keys:
Calibration parameters.
Refer to "Electrode calibration parameters", page 100
Calibration solutions.
Refer to "Solution menu", page 210
Results.
Refer to "Results menu", page 188
Printouts.
Advertising