Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 143)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 143
Number of
additions Set the number (1 to 3) of additions to be performed automatically by
an Addition method.
Refer to "Addition method - definition", page 49 .
Enter in:
Edit method menu (Addition method)
Number of
buffers Available if Calibration request = Yes
Number of pH standards to be used for the calibration. Work with at
least two standards to calculate the electrode sensitivity. If one stand-
ard is only used the zero pH is calculated.
Enter in:
Edit electrode menu
Range available:
1 to 5
Refer to "pH calibration solutions parameters", page 149 .
Number of
cycles Available if Calibration request = Yes
Number of times the calibration is to be repeated, i.e. the number of
beakers to be prepared for each pH standard.
Enter in:
Edit electrode menu
Range available:
1 to 9
Number of
decimals Number of decimals (0 to 3) to be displayed and printed for the result.
Enter in:
Edit method > Results (for a pH measurement method)