Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 28)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 28
7.
Enter the calibration parameters.
8.
Press 1.
9.
Select the electrode used for
the calibration. This electrode
must be the one defined in the
method using this reagent.
Enter the calibration parame-
ters. Press Esc then 2.
10.
Enter the parameters of the stand-
ard used for the calibration. Press
Esc then 3.
11.
Enter the Results parameters.
Press Esc then 4.
12.
Enter the printouts parameters.
Press Esc twice. Reagent pro-
gramming is completed.