Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 161)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 161
QC data menu This menu is available for measurement and titration methods.
To access:
1. Enter the Main window.
2. Select or create a method.
3. Select QC sample = Yes in the Edit method menu.
4. Use the LEFT/RIGHT arrow keys to move to the last Edit method
display.
5. Press 5 QC data.
QC ID Enter the name of the QC sample (16 alphanumeric characters). This
name is called up when you run a QC sample analysis.
QC not required Message appears at the start of a sequence, that originally included a
method programmed with a QC sample.
The method to has now been reprogrammed without QC sample.
Go to Sequence/Sample stack, Edit sequence screen and remove the
QC sample from the sequence.
QC periodicity
elapsed This message is displayed at the start of a method requiring a QC
sample. The Periodicity, entered in the QC Data screen of the method
has elapsed. For example, if Periodicity = 10 samples, then a QC
sample must be performed every 10 samples.
Press
✓ and run a QC analysis.