Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 186)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 186
Result unit Unit used for the result.
Enter in:
Edit method > Results
Range available:
If Sample unit = ml or µl: mol, mmol, eq/l, meq/l, mol/l, mmol/l, g/l,
mg/l, mg/ml or µg/ml
If Sample unit = g or mg: mol, mmol, eq/kg, meq/kg, mol/kg, mmol/kg,
g/kg, mg/kg, mg/g, µg/g, % or ppm.
The result can be expressed as a mass (g, µg, mg) or a volume (µl or
ml).
Results The following results are displayed automatically at the end of a run.
pH calibration
Mean of zero pH (pH0(25))
Mean of sensitivity
Reagent calibration
Titre
Mean ± standard deviation
Measurement method
Measurement
Mean ± standard deviation
Titration method
Based on the volume found at the End point or Inflection point.
Mean and standard deviation for each of the defined result 1 to 8.
In End point, IP monotonic, IP dynamic and IP continuous modes, up
to 8 results and 2 user-defined equations can be calculated.
Results can be accepted or rejected at the end of each test per-
formed,
see "Result accepted (Yes/No)", page 184 .