Routine mode, Titra lab – Hach-Lange TITRALAB 860_865 Reference Manual User Manual
Page 190
Advertising
Titra
Lab
®
TitraLab 860 and 865 Reference Manual
Page 190
Routine mode
In “ROUTINE” mode the user is able to select and run methods.
Clear-text messages and icons present on the large graphic display
guide the user at every step. However, the routine user cannot create
or modify methods, reagents or electrodes.
When the working order is respected i.e. ELECTRODE then
TITRANT, you will be able to perform the following:
•
RUN the active method,
•
CONNECT the electrode system or CALIBRATE an electrode (if
required),
•
INSTALL the reagent system, CHANGE THE REAGENT BOTTLE
and CALIBRATE a reagent (if required).
Refer to "User’s rights", page 225
.
Advertising