Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 75)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 75
Check reagents Press 3 in the Reagent window to display the parameters of the cur-
rent reagent used in the system. For example, reagent ID, date of next
calibration, expiry date etc.
Communication
failure (SAC
error) The data transmission between the sample changer and the worksta-
tion cannot be performed properly.
Check the cable connections and make sure that the sample changer
is switched on and connected to the workstation via the RS232 serial
cable.
Press the workstation key
✓ or Stop and restart the sequence. It is
not possible to continue the sequence from the point it stopped.
Concentration Concentration of the titrated species present in the standard.
Enter in:
Edit reagent > Standard
Range available:
0.001 to 100000 (unit = Concentration unit)
Concentration
unit Standard concentration unit.
Enter in:
Edit reagent > Standard
Range available:
If Amount unit = ml or µl: eq/l, meq/l, mol/l, mmol/l, g/l, mg/l, mg/ml
If Amount unit = g or mg: eq/kg, meq/kg, mol/kg, mmol/kg, mg/g,
mg/kg,%