Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 181)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 181
Reprocessing a
curve
(Automatic
mode) Perform the following operations to reprocess a curve in
automatic mode (Supervisor mode only):
1. Create a Coupled method, see "Programming methods", page
29 .
2. For line 1(or at the line preceding the so-called “Reprocess“
method): select the method which generates the curve.
3. Select the so-called “Reprocess“ method at the next line.
(*) Refer to "Reprocessing a curve (rules)", page 180 .
4. Select Yes for Use for reprocessing.
Run the Coupled method to start the curve reprocessing
The reprocessed results are stored with the “Reprocessed“ indication.
To view results,
see "GLP-Archives menu", page 122 .
An EP or IP method must be selected.
This method must be edited with specific
rules (*).
Then press ✓ to confirm.
A method selected with the Reprocessing option
is displayed with its number in brackets in the
sequence.
For example:
1 Alkalinity
(2) Alkalinity-Rep