Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 116)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 116
Error messages See also "Check command", page 74 .
Titration Manager errors:
"Active electrode unknown in "method ID"": see page 45.
"Add. reagent = Titrant": see page 46.
"Archives data lost - Cal. Data lost - Methods kept": see page 53.
"Back reagent = Titrant": see page 57.
"Back reagent unknown": see page 57.
"Blank not required": see page 68.
"Blank required": see page 68.
"Calibration delay elapsed": see page 70.
"Curves data lost - Cal. Data kept - Methods kept": see page 83.
"Dilution or sample unit incompatible": see page 88.
"Electrode calibration not required": see page 100.
"Electrode not calibrated": see page 105.
"Electrodes are different": see page 107.
"Expiry date elapsed": see page 118.
"Ground conflict": see page 122.
"Input address conflict": see page 124.
"Insufficient number of beakers": see page 126.
"Max. stab reached": see page 130.
"Max. vol - Predose > Bur. vol": see page 131.
"Max. volume reached": see page 131.
"Measure type conflict for a reprocessing in "Method ID"": see page 132.
"Method type incompatible for a reprocessing": see page 135.
"Method wrong type": see page 135.
"Missing EP": see page 140.
"Missing IP": see page 140.
"No curve generation for a reprocessing": see page 141.
"No curve stored within the instrument": see page 142.
"QC analysis required": see page 160.
"QC not required": see page 161.
"QC periodicity elapsed": see page 161.
"Reagent calibration not required": see page 170.
"Reagent not calibrated": see page 173.
"Reagent titre not entered": see page 174.
"Ref. electrode conflict": see page 176.
"Reset memory": see page 183.
"Same buffer change buffer": see page 197.
"Sample dilution conflict": see page 200.
"Sample unit conflict": see page 203.
"Sample type incompatible": see page 202.
"Standard unit incompatible": see page 212.
"The sequence is empty": see page 220.
"Wrong buffer": see page 226.
SAC errors:
"Communication failure (SAC error)": see page 75.
"ERR#32 (SAC error)": see page 115.
"Missing beaker (SAC error)": see page 139.
"No stirrer (SAC error)": see page 142.
"SAC arm obstructed (SAC error)": see page 196.
"SAC option missing (SAC error)": see page 196.
"SAC switch Off/On (SAC error)": see page 196.
"Tray missing (SAC error)": see page 222.
"Turntable blocked (SAC error)": see page 223.
"Wrong type (SAC error)": see page 226.