Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 128)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 128
Keyboard
connection Connect an external mini-keyboard to the Titration Manager via the 6-
pin mini DIN port situated on the right hand side of the instrument.
Keyboard type: PCT or compatible with a 6-pin mini DIN connector.
A Notebook Keyboard Mask, part no. X31T108 indicating the key-
board functions is available for use with the mini keyboards.
Keyboard functions
In combination with the Titration Manager (TIM) the keys of the PC
keyboard perform predefined functions. Refer to the table below.
Figure 23: Keyboard functions
PC keyboard TIM keys TIM operation
<Print screen> Print Printout data
<Esc> Esc Leave menus
<Pause> Stop Stop analysis
<Del> Del Deletion of a character.
End a Start timer delay or a Delay
after addition.
Interruption of an analysis with
result calculation
Enter Check mark Confirmation of an entry
<Up arrow> Up arrow Menu lines can be scrolled
<Down arrow> Down arrow Menu lines can be scrolled
<Left arrow> Left arrow Select a window
<Right arrow> Right arrow Select a window
Home - Go to Main screen
<F1> - Run analysis
<F2> - Calibrate/Enter titre
<F3> - Calibrate electrode
<F4> - Select method or
Edit sample stack
<F5> - Install reagent system
<F6> - Install electrode system
<F7> - Burette functions
<F8> - Direct measurement
<F10> - Select stirring speed-Cell menu
<F11> - GLP - Archives (Sample)
<F12> Stop 3 s Enter Setup menu