Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 173)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 173
Reagent ID Name of the reagent. It is recommended to enter the chemical for-
mula of the reagent followed by its concentration (e.g. HCL 0.1)
Enter in:
Reagent window > Edit reagent.
Range available:
Up to 20 alphanumeric characters.
Reagent
identification A reagent is identified with the following parameters entered in the
Edit Reagent menu:
• ID and Unit
• Titre
• Address
Reagent library To access, press 4 in the Reagent window.
The reagent library comprises the following menus and commands:
Reagent not
calibrated The reagent has not been calibrated and there is no reagent data
stored in the archives. Press
✓ and calibrate the reagent.
Reagent
library
New
reagent
Default
parameters
Delete
reagent
Edit reagent
Calibration parameters
Standard
Results
Commands/
actions
Programming
data
Printouts