Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 74)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 74
Check
command If a Stormy or a Question mark icon appears in the Reagent/Electrode
windows, press 1 to run the “Check” command. The Titration Manager
will automatically guide you through the operations required to solve
the problems encountered.
For example:
Check
electrodes Press 3 in the Electrode window to display the parameters of the cur-
rent electrode used in the system. For example, electrode ID and
address.
Press 1
Press
✓
Press 1 to start the Electrode
Installation procedure.