Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 89)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 89
Display
measurement Press 5 in the Electrode window.
The signal measured of a connected electrode in the current system
is displayed. If several electrodes are connected, select the electrode
at the ID line.
Depending on the type of electrode connected, the display shows:
• pH and corresponding potential difference in mV (pH electrodes)
• potential difference in mV (metal/redox or ISE electrodes)
• temperature in °C (temperature sensors)
• potential difference in mV and polarisation current in µA (mV(i>0)
measurement mode for a double metal electrode). The polarisation
signal parameters are entered in the Method parameters or
Reagent parameters menus.
Refer to "Applied signal (AC/DC)", page 53 .
Refer to "Current value", page 83 .
Press 1 to apply or stop stirring.
Press Esc to stop measurements.