Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 206)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 206
Sequence/
Sample stack
menu In this menu, you can edit a sequence and the sample stack
associated.
To access:
1. In the Main window, select Sequence or SAC sequence for
Working mode.
2. Press 2 Sequence/Sample stack.
Refer to "Edit sequence menu", page 97 .
Refer to "Sample stack", page 202 .
Refer to "Start from", page 213 .
Refer to "Skip empty position", page 208 .
Refer to "Sequence/SAC sequence", page 205 .
Sequence end
in Park (Yes/No) At the end of a sample changer sequence, you can dip the electrodes
into the Park beaker filled with a conditioning solution or you can left
the electrodes above the Park beaker (electrodes are stored dry in
this case).
Enter in:
Setup menu > Configuration (if Sample changer = SAC850 or
SAC950)
Sequence ID Name of the sequence.
Enter in:
Sequence/Sample stack menu.
Refer to "Sequence/Sample stack menu", page 206 .
Range available:
Up to 16 alphanumeric characters.
Type of sequence (TIM or SAC)
Sequence ID (name)
Edit the sample stack
Reset the sample stack
Edit the sequence
Start from a beaker number of your choice
Cannot be changed here.
Select to skip or not skip an empty position
of a SAC sequence