Hach-Lange TITRALAB 860_865 Reference Manual - Manual (Page 106)

Titra Lab ® TitraLab 860 and 865 Reference Manual
Page 106
Electrode
system An electrode system comprises all the electrodes necessary to run a
method or a sequence of methods.
A method, consists of an indicating electrode, a reference electrode
and, if required a temperature sensor.
A sequence, can consist of several indicating electrodes.
When a method/sequence is run, the instrument prompts you
to connect or disconnect the electrodes that will be required to
run this method/sequence.
Electrode type The electrode type is displayed with respect to the function selected
(
see "Function", page 120 ). The electrode type is defined when a new
electrode is created.
Refer to "Create electrode", page 82 .
The different electrode types are listed below:
Table 4: Electrode functions and types
If Combined pH is defined, the Titration Manager prompts
you to specify if it has a built-in temperature sensor.
If a Single electrode is defined, the Titration Manager
prompts you to define a reference electrode.
Type Function
Single pH pH
Combined pH (without temp. sensor) pH
Single metal/redox mV (i=0)
Combined metal/redox (without temp.
sensor) mV (i=0)
ISE single mV (i=0)
ISE combined (without temp. sensor) mV (i=0)
Reference Reference
Temperature sensor T°C
Metal Ground
Double metal mV (i >0)