Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 101)

6–15 Working with Applications and Screens
Publication 2711-6.0
Use the Delete Screen command to remove screens from an
application file without placing them on the clipboard.
To delete screens:
1. From the application file window, select the screens to delete.
2. Choose Delete Screen from the Edit menu.
The screens are removed from the Application File window.
Numbers of deleted screens are used when new screens are created.
This section shows how to copy screens within an application using
the Copy and Paste commands on the Edit menu.
To copy a screen within an application:
1. Select the screen you want to copy from the application file
window.
2. Click the Copy tool on the tool bar or Choose Copy Screen from
the Edit menu.
PanelBuilder copies the screen to the clipboard.
3. Click the Paste tool on the tool bar or choose Paste Screen from
the Edit menu.
4. PanelBuilder pastes the screen into the application file window at
the lowest available screen number.
In the following example, screen 2 – Feed Pump is copied to screen
5 with the same screen name.
Use the Attributes command on the Screen menu to change the name
of the copied screen.
Deleting Screens
Copying Screens
within an Application