Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 380)

22–10 Multilingual Support
Publication 2711-6.0
To save a font file to a memory card:
1. Load an ATA Flash card (Catalog No. 2711-NM22, -NM24,
-NM26) in the card drive on your computer.
Important: To write the font file to a memory card directly from
FontTool, you must use an ATA Flash card.
2. Click the Save to Memory Card tool on the tool bar or choose
Save to Memory Card from the File menu.
The dialog shows a list of Memory Card Drives detected on the
computer.
3. Select the font .(OTF) file from the \PBWIN\FONT folder you
want to save to a memory card.
4. Select the Memory Card Drive.
5. Click OK to save the font file to the memory card.
Note: You can also save a font file to an ATA card using the Save
As dialog by selecting the memory card drive from the Drive’s list.
Printing Font Files
You can print the sample text associated with a font file.
To print the sample text for a font (.OTF) file:
1. Open the font file you want to print. (Choose Open command
from File menu.)
2. Click the Print on the tool bar.
Or choose Print from the File menu.
Use the Print Setup command on the File menu to select a different
printer or change printer settings.