Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 215)

13–11 Creating Message Displays
Publication 2711-6.0
5. Configure the properties for triggering print messages. They are
identical to the Message Display on page 13–6.
6. Click the States tab.
Initially a Print Only Object is created with 2 messages and one
error state.
The Value field appears only
if Value was selected under
Read on the Properties tab.
7. Choose Append State from the popup menu for each message you
want to add to the print object. Use the exact number required.
8. If the Value field appears for each message, enter the value that
will trigger the message to print.
9. In the Text field, enter the text that will print when the message is
triggered. To insert a time, date or numeric variable in a message,
choose an Embedded Variable option from the popup menu.
10. Click OK when done to exit dialog.
The Print Only Object Setup dialog reopens. The print object just
created now appears in the Existing Objects list.
11. Click OK to exit dialog.