Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 412)

23–24 Validating and Transferring Applications
Publication 2711-6.0
Verifying an Application
Use the Verify command to compare an application with an
application loaded in a specific terminal. You might want to
download an application only if it is different from the application in
the terminal. The verification process checks whether the
applications match.
To verify an application:
Select source terminal for the verify.
➀ Click the Verify tool or choose Verify from the File menu.
➁ Select Verify parameters
Enter name of .PVA file to verify or
click Browse to search for a .PVA file.
Select appropriate driver
(Internal DF1 driver or
RSLinx or INTERCHANGE driver)
Select the type of terminal for which
you are verifying a loaded application.
➂ After clicking OK, the Application Verification dialog opens.
The dialog shows whether the applications match or not.
Click OK to start the
verify.
Depending on the
Source selected, you
may have to click Setup
to edit/verify terminal
parameters.