Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 324)

19–12 Working with Tags
Publication 2711-6.0
Tags may be printed if the computer is connected to a printer and the
correct drivers are installed. See the manual for the printer and the
Windows manual. Make sure your printer is connected and online.
Important: The Print command is not active if a row is being edited
(indicated by a pencil in the Status column). Select a
different row (which stores the edited row) before
choosing the Print command.
To print tags:
1. Click the Print tool on the tool bar or choose Print from the
Project menu.
Opens Print Setup dialog
Opens Page Setup dialog Name of current printer that will be used.
See the next section to select a different
printer. This field is reset to the default
printer each time you print.
Note: The name of the current printer is displayed. To change to
a different printer, see the next section.
2. Under Print What, specify whether you want to print All Rows in
the current tag view or only selected rows.
If selecting specific rows, see page 19–8 for details on how to
select contiguous or noncontiguous rows.
3. Select the Print The Cover Page box to print the cover page. The
cover page includes product (Allen-Bradley Tag Editor), project
and view name, date and time.
4. Click OK.
Print Details
•
The column width of the printed output is based on the width of
the column in the Tag Editor.
•
The Tag Editor prints as many columns that fit on the width of the
page (minus the margins); columns that do not fit are printed on
the next page. The Tag Editor does not print a column if it is less
than one character wide.
•
If the entire height of a row does not fit on the page, then the row
is printed on the next page (each row is only one text line high).
Printing Tags
Table View only