Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 119)

7–11 Working with Objects
Publication 2711-6.0
You can change the stacking order of objects that overlap. You can
stack objects on top of each other and then change the order in which
they appear.
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗ
ЗЗЗ
ЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
ЗЗЗЗ
Bring to Front Original Stack Send to Back
To bring an object to the front of the object stack:
1. Select the object.
2. Click the Bring to Front tool on the format bar.
Or choose Bring To Front from the Edit menu.
To send an object to the back of the object stack:
1. Select the object.
2. Click the Send to Back tool on the format bar.
Or choose Send To Back from the Edit menu.
Use the Bring Dynamic Objects To Front command to move all
objects that interact with a controller address in front of other objects
on the screen.
You can increase or decrease the view of the screen so that objects
look larger or smaller than their actual size. Changing the view
affects only the appearance of objects, not their actual size.
To zoom in or enlarge the view of the screen:
•
Click the Zoom In tool on the tool bar.
•
Or choose Zoom In from the View menu.
You can increase the view several times. If starting from Full Size,
the view increases each time you click Zoom In.
To zoom out or reduce the view of the screen:
•
Click the Zoom Out tool on the tool bar.
•
Or choose Zoom Out from the View menu.
You can decrease the view several times. If starting from Full Size,
the view decreases each time you click Zoom Out.
To return the screen to its normal size, choose Full Size from the
View menu.
Stacking Objects
Zooming In and Out