Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual User Manual
Page 387
![background image](/manuals/580393/387/background.png)
22–17
Multilingual Support
Publication 2711-6.0
To create and save the font file:
1. Open FontTool.
2. From the File menu, choose New Font.
3. Select the appropriate language, sizes, and font style.
4. After the font file is generated, choose Save As from the File
menu to save the font file (.OTF) in the \PBWIN\FONT folder.
5. From the File menu, choose Save to Memory Card to save the
font file (.OTF) to a memory card.
6. Close FontTool.
To enable the font in PanelBuilder:
The characters will not appear correctly in the application until after
you enable the font file in PanelBuilder.
1. In PanelBuilder, choose Terminal Setup from the Application
menu.
2. Click the Font Setup button.
3. Select the External Fonts Enabled check box.
4. From the External Font File list, select the font file.
5. Click OK until you exit the Terminal Setup dialog.