Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 421)

24–5 Creating Reports
Publication 2711-6.0
To print a report, a printer must be connected to your computer and
your computer must recognize the printer as a valid printer. See your
Microsoft Windows User’s Guide for details on installing print
drivers.
To set up the printer:
1. Click the Printer Setup button from the Report Setup dialog.
The standard Microsoft Print Setup dialog opens.
2. Set appropriate attributes for your printer.
3. Click the Options button to enter options specific to your printer.
The Options dialog is different for each printer type.
4. When done, click the OK button. Or click Cancel to exit the
dialog without saving changes.
If your printer is not listed:
•
Check for hardware compatibility between your printer and one
of the printers listed.
•
Check if your printer has an emulation mode that is compatible
with one of the printers listed.
•
You may need to install a print driver for your printer. Refer to
the Microsoft Windows User’s Guide.
Setting up a Printer