Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 296)

17–26 Formatting Objects and Text
Publication 2711-6.0
Aligning Text
You can align screen text or inner text of an object in three ways: left
align, right align or center align.
Align
Text
to the Left
Center
Text
Align
Text
to the Right
For multistate and list objects, you can align the text differently for
each state.
To change text alignment:
1. Select the object whose text you want to align.
2. Click the Inner Text tool on the tool bar.
Or choose Inner Text from the Format menu.
3. If the object is multistate, select a state.
•
From the tool bar, select a state from the State box.
•
Or choose Next State or Previous State from the Format menu.
4. Choose an alignment option from the Format " Align Text
submenu.
Or click the appropriate align tool on the Format bar.
The entire text string is realigned.
5. To resize, underline, set colors or activate blinking for the text,
click the appropriate tools on the Format bar.
6. To exit inner text mode, choose the Inner Text command or tool.
For multistate and list objects, you can change text alignment from
the State tab of the object’s dialog.
Left Center Right
"