Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 276)

17–6 Formatting Objects and Text
Publication 2711-6.0
Changing Fill Pattern
The interior of rectangular objects can be filled with a solid color or
a pattern. You can apply a different fill pattern to each state of a
multistate object so that the fill pattern changes with each state. The
default fill pattern is white.
ОО
ОО
ОО
ОО
State 0 Fill
State 2 Fill
Multistate Push Button
with Different Fill Patterns
ОООО
ОООО
ОООО
Low
ФФФФ
ФФФФ
ФФФФ
Normal
ЦЦЦЦ
ЦЦЦЦ
ЦЦЦЦ
High
State 1 Fill
ПППП
ПППП
ПППП
Bar Graphs
with Different Fill Patterns
Push Button
with Inner Graphic and Fill
On color or grayscale terminals, you can not assign fill patterns to
circles or ellipses. On monochrome monitors, valid fill patterns for
circles and ellipses are black, white or none.
To add a fill pattern:
1. Select the object.
2. If the object is a multistate object, select a state.
•
From the tool bar, select a state from the State box.
•
Or choose Next State or Previous State from the Format menu.
3. Click the Fill tool on the Format bar.
Or choose Fill Pattern from the Format menu.
The Fill submenu opens.
4. Choose a fill option.
After selecting the fill pattern, the pattern appears in the object.
If you select an object that can’t be filled, the fill commands
appear dimmed to show the fill can’t be changed.
The fill changes but the object maintains all other characteristics
such as shape, line type and so on.
For multistate objects, you can set the fill pattern for a state directly
from the State tab of the object’s dialog.
"