Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 351)

20–19 Terminal and Communication Setup
Publication 2711-6.0
The Time/Date tab in the Terminal Setup dialog specifies how the
time and date are displayed on the PanelView terminal.
With dates, you can vary the order of the month, day and year or
change the punctuation used to separate parts of the date. You can
display times in 12-hour or 24-hour format with different suffix
notations such as AM for morning or PST for Pacific Standard Time.
Month/Day/Year
7/3/99
Day/Month/Year
3/7/99
Year/Month/Day
99/7/3
With Leading Zeroes
07/03/99
With 4-digit Year
7/3/1999
With User
Defined Separator
7*3*99
12-Hour Format
2:56
24-Hour Format
14:56
With Seconds
14:56:29
With Time Zone & Time
Standard Designations
2:56 PM CST
With Leading Zeroes
02:56
With User
Defined Separator
14*56*29
Date Formats Time Formats
To activate the time/date settings in the PanelView terminal, you
must enable the “Use downloaded configuration settings” option in
the Power–Up tab on the Terminal Setup dialog.
To change the time or date format used by the terminal:
1. Select the Time/Date tab from the Terminal Setup dialog.
2. Set the options you want for the date format. The Sample area
displays the format as you select options.
Setting Time/Date Format