Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 233)

15–11 Creating Alarms
Publication 2711-6.0
Alarm List Examples
You can create multiple alarm lists to display specific types of
information for alarms.
•
Active Alarms that have not been acknowledged.
When a bit triggered alarm is acknowledged in the terminal, the
alarm is automatically removed from the list.
If an active alarm is cleared or no longer meets its trigger
condition, it becomes inactive and is removed from the list. If the
alarm is triggered again, the original alarm is not reactivated. A
new instance of the alarm is created.
•
Active Alarms that have been acknowledged.
When a bit triggered alarm in the terminal is acknowledged, the
alarm is automatically added to the list.
•
Inactive Alarms that have been acknowledged.
When an unacknowledged alarm in the terminal is acknowledged,
the alarm is automatically added to the list.
For Alarm Lists with active alarms, when an active alarm becomes
inactive, it is automatically removed from the list.