Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 230)

15–8 Creating Alarms
Publication 2711-6.0
Showing Alarm Banner Position
You can show the location of the Alarm Banner from any screen in
the application. By showing the banner, you can see which objects
are covered and which are not. This is important if you want to
disable only those objects that are covered by the banner or
to place objects on the screen where they will not be covered.
To toggle the Alarm Banner on or off:
Choose Alarm Banner Position from the View menu. A check mark
(
n) next to the command indicates the banner is active.
The banner appears as a rectangle (white on color/grayscale
terminals and black on monochrome terminals). You cannot move or
size the banner unless you are in the Alarm Banner screen.