Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 149)

9–9 Creating Control List Selectors
Publication 2711-6.0
Input
Specifies whether the operator presses a function key or a touch cell
to activate a control list.
•
For a keypad terminal, select a function key from the list.
•
For a touch screen terminal, touch cell is automatically enabled.
PanelView 550/600 Keypad & Touch Screen terminals support
function key and touch cell input.
The selected function key displays a graphic of a control list and an
asterisk next to the key number, indicating the key is used.
*F1
Control List
Asterisk
Wrap Around
Specifies whether the selection cursor moves to the top or bottom of
the list when the operator presses the down or up arrow
key on the last or first item in the control list.
Click the check box to activate wrap around. To disable wrap
around, clear the check box.
Write on Enter
Specifies whether the list selection is sent to the controller
immediately or when the terminal’s Enter
key is pressed.
By default, the operator is required to press the Enter key.
To disable Write on Enter, clear the check box.