Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 138)

8–8 Creating Push Buttons
Publication 2711-6.0
Use the States tab to:
•
edit text for each state
•
enter a value for each state (if required)
•
insert a graphic for each state
•
edit format options for each state
•
add or delete states for a multistate push button
To configure the states of a push button:
1. Click the States tab on the Push Buttons dialog.
A spreadsheet opens for state editing. Each row represents a push
button state (row 0 represents state 0, row 1 represents state 1).
– For 2-state push buttons, 2 rows appear (states 0 and 1)
– For a multistate push button, 4 rows appear (states 0 – 3)
Each row has fields which define the visual characteristics of
each state.
2. Edit the fields as necessary.
3. Click OK to exit the Push Buttons dialog.
The Value field appears only if
Value was selected in the Write
area of the Properties tab.
For a description of all the fields for a state, see page 7–15.
Configuring
Push Button States
"