Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 79)

5–7 PanelBuilder Basics
Publication 2711-6.0
PanelBuilder provides toolboxes, in addition to menu commands, to
create screen objects. The main toolbox contains controls, displays,
list keys and graphics. The ISA Symbols toolbox contains standard
ISA symbols. Appendix B describes each tool. To choose an object,
click the appropriate tool in the toolbox.
The toolboxes can be moved like any other window.
To toggle a toolbox on or off:
Choose Toolbox or ISA Symbols from the View menu.
A check mark ( n ) appears next to the command when the toolbox is
active. To close a toolbox, choose the appropriate command again.
You can view application screens with or without the numeric
keypad.
To toggle the keypad on or off:
Choose Keypad from the View menu.
A check mark (✓) appears next to the command when the keypad is
active. Select the command again to turn off the keypad.
Toolboxes
Keypad Display