Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 183)

12–3 Creating Bar Graphs, Indicators, Numeric Displays
Publication 2711-6.0
Multistate Indicators
Multistate indicators have an error state to notify an operator when
data is out of range or when multiple states are triggered. The error
state (State E) is accessed from the States tab of the dialog or from
the State box on the tool bar. The inner text for State E is Error. You
can assign different inner text or display attributes to the error state.
Error
State 0
State 1
State 2
State E Default Inner Text
for Error (E) State
Bar Graphs
A bar graph is either empty or filled if a value is not within the
allowable range of values.
100
75
50
25
100
75
50
25
Value Equals or Exceeds
Maximum Range
0
0
Value Below
Minimum Range
List Indicators
No list entry is highlighted if the data is outside of the allowable
range or if multiple states are triggered.
OFF
TEMPERATURE LOW
NORMAL
TEMPERATURE HIGH
Error=No state highlighted
Numeric Data Displays
If a value exceeds the specified field width for the numeric data
display, the overflow value is replaced with asterisks.
Error States