Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 176)

11–6 Creating Screen Selectors
Publication 2711-6.0
To set properties of a Screen List Selector:
1. Double-click the screen list selector object.
2. Under Input, specify whether the operator presses a function key
or a touch cell to activate the screen list.
•
For keypad terminals, select a function key from the list.
•
For touch screen terminals, touch cell is enabled.
PanelView 550/600 Touch Screen & Keypad terminals support
function key and touch cell input.
When exiting the dialog, the selected function key displays a
graphic of a screen list selector and an asterisk next to the key
number.
*F1
Screen List
Asterisk
3. Select the Wrap Around check box to enable or disable wrap
around for the selection cursor. The default is disabled.
Wrap around moves the selection cursor to the top or bottom of
the list when the down
or up arrow keys are pressed on
the last or first screen in the list.
Setting Properties
of a Screen List Selector