Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual User Manual
Page 190
12–10
Creating Bar Graphs, Indicators, Numeric Displays
Publication 2711-6.0
Setting Properties of a Numeric Data Display
To set the properties of a numeric data display:
1. Double-click the object.
Opens
Tag Dialog
2. Set the numeric display properties as defined on the next page.
3. When done, click OK.
Digits
The Field Width box specifies the maximum number of characters
(including 0-9 + - . ) that can appear in the display. The default is
6. If the value from the logic controller exceeds the specified field
width, the field on the terminal display fills with asterisks **** .
Unfilled data positions are left blank. To fill empty data positions
with zeroes, click the Fill with Zeroes check box.
00065932
65932
Value to Display
65,932
8 Digit Maximum
Zero Fill
5 Digit Maximum
No Zero Fill