Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 322)

19–10 Working with Tags
Publication 2711-6.0
5. Highlight the value in the Number of Duplicates text box and
type a number.
The number of duplicates is also displayed in the Duplications
text box on the tool bar. You can highlight and change this value
without entering the Duplication dialog.
Use this tool or command to locate any tag or tags in the Tag Editor
by name. Other attributes cannot be used in the Find dialog.
Important: If the active View is BCD/Integer, the Find command
cannot locate tags with bit addresses.
To find a tag:
1. Click the Find tool on the tool bar or choose Find from the Edit
menu.
2. In the Tag Name box, type the name of the tag to find and press
ENTER .
The Find command locates all tag names containing the
characters that you type (it is not case sensitive). For example, if
you enter switch, the Find command locates: switch, Switch,
SWITCH, Switch_5, Limit_switch, LimitSwitch, etc.
3. Click on the appropriate button to move among the occurrences
of the tag name.
Click: To:
Move to first occurrence in current view.
Move to previous occurrence.
Move to next occurrence.
Move to last occurrence in current view.
4. When done, click the Cancel button or press ESC .
Finding Tags
Table View only