Freeform drawings – Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual User Manual
Page 260
Advertising
16–6
Adding Graphics
Publication 2711-6.0
You can create your own freehand drawings.
To create a freeform drawing:
1. Click the Freeform tool in the toolbox
Or choose Freeform from the Objects
"
Graphics submenu.
2. Position the pointer where you want to start drawing.
3. Hold down the left mouse button and drag the mouse while
drawing. When done drawing, release the left mouse button.
4. Click the right mouse button to exit freeform mode.
Or click the selection tool on the toolbox.
Freehand drawings are memory intensive. For complicated
drawings, create a bitmap graphic of the drawing with another source
program and then import the graphic.
Freeform Drawings
Advertising