Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 130)

7–22 Working with Objects
Publication 2711-6.0
Color to Grayscale Application
When copying or moving an object from a color to a grayscale
application, objects are pasted as follows:
•
colors of objects are converted to the closest shade of gray
•
color bitmaps are converted to grayscale bitmaps
Touch Screen to Keypad Application
When copying/moving objects from a touch screen to a keypad
application, you must assign function keys to the pasted objects.
Different Communication Protocol
When copying/moving objects to an application that uses a different
communication protocol, you must update the tags appropriately for
the pasted objects.
Use the Delete command to remove objects from an application
screen without placing them on the clipboard.
To delete objects from a screen:
1. Select the objects you want to delete.
2. Choose Delete from the Edit menu.
To delete all objects from a screen:
1. Choose Select All from the Edit menu.
2. Choose Delete from the Edit menu.
To delete an object from a function key:
1. Select the function key.
2. Choose Delete from the Edit menu.
PanelBuilder deletes the object and graphic from the function key.
PanelBuilder lets you cancel the previous editing operation. If an
operation cannot be canceled, PanelBuilder lets you know. You
cannot cancel the previous screen operation if the screen is closed.
To cancel the previous editing operation:
•
Click the Undo tool on the tool bar.
•
Or choose Undo from the Edit menu.
The Edit menu shows the name of the operation that will be undone.
For example, lets say you delete an object and then want to cancel
the delete. When you open the Edit menu, choose Undo Cut/Delete.
Deleting Objects
Reversing an Operation