Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual User Manual
Page 471
Troubleshooting
F–9
Publication 2711-6.0
Errors and Informational Messages Specific to CFG_485.EXE
This error indicates the Virtual Driver for DH485 isn’t running.
CFG_485 (0020) DH485 Fatal Error; V485 Driver not installed.
These errors indicate problems setting up the COM port.
CFG_485 (0021) DH485 Serial Communication Port not found.
CFG_485 (0022) DH485 Link Layer attach error.
CFG_485 (0023) DH485 Link Layer initialization error.
CFG_485 (0024) DH485 Link Layer configuration error.
This error indicates a conflict over which COM port is to be used.
CFG_485 (0025) DH485 CFG_KT.INI and SYSTEM.INI comm port inconsistency.
This error indicates that the driver did not exit cleanly.
CFG_485 (0026) DH485 Fatal Error during Link Layer Cleanup.
Errors and Informational Messages Specific to CFG_DF1.EXE
This error indicates the Virtual Driver for DF1 isn’t running.
CFG_DF1 (0020) DF1 Fatal Error; VDF1 Driver not installed.
These errors indicate problems setting up the COM port.
CFG_DF1 (0021) DF1 Serial Communication Port not found.
CFG_DF1 (0022) DF1 Link Layer attach error.
CFG_DF1 (0023) DF1 Link Layer initialization error.
CFG_DF1 (0024) DF1 Link Layer configuration error.
This error indicates a conflict over which COM port is to be used.
CFG_DF1 (0025) DF1 CFG_KT.INI and SYSTEM.INI comm port inconsistency.
This error indicates that the driver did not exit cleanly.
CFG_DF1 (0026) DF1 Fatal Error during Link Layer Cleanup.