Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 377)

22–7 Multilingual Support
Publication 2711-6.0
Note: For the following
single-byte languages, select
MS LineDraw under Font.
– English
– French
– Italian
– German
– Spanish
5. Select a font style.
6. Click OK to generate the font file.
The time it takes to generate the file depends on the number of
characters and sizes in the definition, and your computer’s speed.
Sample text is defined for each font definition. The sample text is
displayed for the font definition in the selected style. Verify that
the text looks okay.
At this point, the font file is resident in memory but not on disk.
The status bar located at the bottom of the FontTool window
shows the size of the font file.
You must save the font file to:
•
\PBWIN\FONT folder to access the file when creating an
application with the PanelBuilder software.
•
memory card, which will be inserted in the card slot of the
PanelView where the application will run.
See the section on Saving Font files.