Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 155)

10–3 Creating Data Entry Controls
Publication 2711-6.0
Numeric Entry Examples
The following examples show how numeric entry objects are used to
adjust the temperature and inflow of a tank.
Cursor Point Example
The operator selects one of the cursor point objects in the EDIT box
using a function key, touch cell or left/right arrow keys on the
terminal and then presses
Cursor Point
Objects
The scratchpad opens in the center of the screen. The operator enters
a new value using the terminal keypad.
Entered Value
Keypad Enable Example
The operator selects the Enter Temp or Enter Deg keypad enable
button using a function key or touch cell.
Keypad
Enable Buttons
The scratchpad opens in the center of the screen. The operator enters
a new value using the terminal keypad.
Entered Value