Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 454)

Software Error and Warning Messages D–8
Publication 2711-6.0
Message What to do Meaning
Min/Max Range Values must be between 0
and 65535.
Min/Max Range Values must be between 0
and 9999.
Min/Max Range Values must be between 0
and (value).
Va e entered that s not w th n the va d ran e. Enter a new va e w th n va d ran e.
and va e .
Min/Max Range Values must be between
-32768 and 32767.
Min/Max Range Values must be between
-99,999,997,952 and 999,999,995,904
Min/Max Range Values must be binary (a
combination of 0 and 1)
Value entered that’s not within the valid range. Enter a new value within valid range.
Write access denied for the specified
translation file or current directory File or directory could not be accessed. Check write access.
You must assign an input F-Key. Object must be assigned a function key. Assign available function key to object.
You must assign an input F-Key or
turn the view on. Object must be assigned a function key or the
object view must be turned on. Assign available function key to object or turn
the object view on.
You must select a valid terminal and firmware
combination. The terminal you selected is not compatible
with the firmware specified. Make sure terminal and firmware are
compatible.