Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 392)

23–4 Validating and Transferring Applications
Publication 2711-6.0
Printing Validation Messages
To send validation messages to a printer:
•
a printer must be connected to your computer
•
the computer must recognize the printer as a valid printer
See the Microsoft Windows User’s Guide for details on installing
printers.
To set up the printer:
1. Click the Print Setup button from the Exceptions dialog.
The standard Microsoft Print Setup dialog opens.
2. If the default printer is not the one in use, select a printer from the
Specific Printer list box. If it is not listed see below.
3. Set appropriate attributes for your printer.
4. Click the Options button to enter options specific to the printer
you are using. The Options dialog is different for each printer.
5. When done, click the OK button.
6. Click the Print button from the Exceptions dialog to print the
validation messages.
7. Click Close to exit the Exceptions dialog.
If your printer is not listed:
•
Check for hardware compatibility between your printer and one
of the printers listed.
•
Check if your printer has an emulation mode that is compatible
with one of the printers listed.
•
You may need to install a print driver for your printer. Refer to
the Microsoft Windows User’s Guide.