Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 379)

22–9 Multilingual Support
Publication 2711-6.0
Saving Font Files
FontTool provides 3 commands for saving files.
Save Commands Description
Save
Saves a file that was previously opened to the same file
name and location. If you are saving a new file, the Save
As dialog opens, asking you to confirm the file name and
location.
Save As
Saves the file with a new name and/or location, leaving
the original intact.
Save to Memory Card
Saves the font file to a memory card located in the card
drive on the computer.
To save a font file to the same location with the same file name:
Click the Save tool on the tool bar or choose Save from the File
menu.
To save a font file under a new name and/or location:
1. Choose Save As from the File menu.
The File Save As dialog shows the current file name and location
of the font file.
2. In the File Name box, enter a descriptive file name (up to 8
characters) with the .OTF extension.
PanelBuilder expects to find all font .OTF files in the
\PBWIN\FONT folder.
3. Click OK.