Rockwell Automation 2711-ND3 PanelBuilder v2.60 Software User Manual - Manual (Page 393)

23–5 Validating and Transferring Applications
Publication 2711-6.0
Sending Validation Messages to File
To send validation messages to a file, you must:
•
add the Generic/Text Only printer to the Installed Printer list
•
assign the printer to a File: port
For details on how to add Generic / Text Only on FILE: to the
Installed Printers list on your computer, see the Microsoft Windows
User’s Guide. This print option allows you to print text, not graphics.
To send validation messages to a file:
1. Click the Print Setup button from the Exceptions dialog.
The standard Microsoft Print Setup dialog opens.
2. Verify that Generic / Text Only on FILE: is the selected printer
under Specific Printer.
If your application uses large text sizes, open the Options dialog and
enable the Wide Carriage option.
3. Click OK to exit the Printer Setup dialog.
4. Click the Print button from the Exceptions dialog.
5. In the Output File Name box, enter the file name in which to save
the validation messages.
6. Click OK to output messages to the file.
If the file name already exists, you are given the option of
overwriting it or entering another file name.
7. Click Close to exit the Exceptions dialog.
"